Discussion:
[N8VEM: 15860] XT-CF-Lite PCBs are available
Sergey
2013-04-25 20:20:45 UTC
Permalink
I received XT-CF-Lite PCBs yesterday. I built and tested one board and
it works properly.

The PCB price is $10/each + shipping - $3 in US, $7 anywhere else. Let
me know if you need multiple PCBs, so I can calculate the shipping.

Note that building the board requires soldering the CF connector,
which is an SMT part (it is not extremely complicated though).

Refer to the project page (http://www.malinov.com/Home/sergeys-
projects/xt-cf-lite) for more details and the bill of materials.

Many thanks to James Pearce for the XT-CF-Lite idea and his work on
the firmware, and to Martin and Roman for testing the prototype.
Bill Lewis
2013-06-17 15:25:19 UTC
Permalink
Where/what is the correct BIOS image to put in the 8K ROM?

Bill
Post by Sergey
I received XT-CF-Lite PCBs yesterday. I built and tested one board and
it works properly.
The PCB price is $10/each + shipping - $3 in US, $7 anywhere else. Let
me know if you need multiple PCBs, so I can calculate the shipping.
Note that building the board requires soldering the CF connector,
which is an SMT part (it is not extremely complicated though).
Refer to the project page (http://www.malinov.com/Home/sergeys-
projects/xt-cf-lite<http://www.malinov.com/Home/sergeys-projects/xt-cf-lite>)
for more details and the bill of materials.
Many thanks to James Pearce for the XT-CF-Lite idea and his work on
the firmware, and to Martin and Roman for testing the prototype.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To post to this group, send email to n8vem-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/groups/opt_out.
Sergey
2013-06-25 06:48:17 UTC
Permalink
Bill,

Sorry for delayed reply - I was on vacation without Internet access...

I used the beta BIOS from James Pearce's site:
http://www.lo-tech.co.uk/wiki/XT-CF-lite#BIOS

But as far as I know it is supported by newer Universal XT-IDE BIOS
(perhaps one from SVN repository).

Thanks,
Sergey
Post by Bill Lewis
Where/what is the correct BIOS image to put in the 8K ROM?
Bill
Post by Sergey
I received XT-CF-Lite PCBs yesterday. I built and tested one board and
it works properly.
The PCB price is $10/each + shipping - $3 in US, $7 anywhere else. Let
me know if you need multiple PCBs, so I can calculate the shipping.
Note that building the board requires soldering the CF connector,
which is an SMT part (it is not extremely complicated though).
Refer to the project page (http://www.malinov.com/Home/sergeys-
projects/xt-cf-lite<http://www.malinov.com/Home/sergeys-projects/xt-cf-lite>)
for more details and the bill of materials.
Many thanks to James Pearce for the XT-CF-Lite idea and his work on
the firmware, and to Martin and Roman for testing the prototype.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To post to this group, send email to n8vem-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/groups/opt_out.
Loading...