[N8VEM: 15890] IDE v.2 680 ohm rpack

[Richard Cini]

All --

On the IDE board RR1 is a 680 ohm rpack. Jameco only allows Q100 orders on
this part. Should I just make one myself or is there a better source?

Thanks!

Rich

--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.classiccmp.org/cini
http://www.classiccmp.org/altair32

[Don Caprio]

Rich,

I just checked and I don't have any ( i was going to send you one).

Abra has them for .59
(http://www.abra-electronics.com/products/SIP%252dCommon-Buss%252d10-Pins%2C-9-Resistors.html)
Mouser .29c
(http://www.mouser.com/ProductDetail/Bourns/4609X-101-681LF/?qs=sGAEpiMZZMvrmc6UYKmaNadBATg2%2fuC9feZXGpWrYwQ%3d)

Post by Richard Cini
All --
On the IDE board RR1 is a 680 ohm rpack. Jameco only allows Q100
orders on this part. Should I just make one myself or is there a
better source?
Thanks!
Rich
--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.classiccmp.org/cini
http://www.classiccmp.org/altair32
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send
Visit this group at http://groups.google.com/group/n8vem?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.

--
Don Caprio
ilvunix-***@public.gmane.org

[Richard Cini]

Thanks Don. I have everything else "in stock" so that was all I needed. I'll
just make one up out of resistors.

Thanks!

Rich

--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.classiccmp.org/cini
http://www.classiccmp.org/altair32


From: Don Caprio <ilvunix-***@public.gmane.org>
Reply-To: N8VEM-Post <n8vem-/***@public.gmane.org>
Date: Saturday, May 11, 2013 7:59 PM
To: N8VEM-Post <n8vem-/***@public.gmane.org>
Subject: Re: [N8VEM: 15891] IDE v.2 680 ohm rpack


Rich,

I just checked and I don't have any ( i was going to send you one).

Abra has them for .59
(http://www.abra-electronics.com/products/SIP%252dCommon-Buss%252d10-Pins%2C
-9-Resistors.html)
Mouser .29c
(http://www.mouser.com/ProductDetail/Bourns/4609X-101-681LF/?qs=sGAEpiMZZMvr
mc6UYKmaNadBATg2%2fuC9feZXGpWrYwQ%3d)

Post by Richard Cini
All --
On the IDE board RR1 is a 680 ohm rpack. Jameco only allows Q100 orders on
this part. Should I just make one myself or is there a better source?
Thanks!
Rich
--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.classiccmp.org/cini
http://www.classiccmp.org/altair32
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an
Visit this group at http://groups.google.com/group/n8vem?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.

--
Don Caprio
ilvunix-***@public.gmane.org
--
You received this message because you are subscribed to the Google Groups
"N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to n8vem+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To post to this group, send email to n8vem-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
Visit this group at http://groups.google.com/group/n8vem?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.