Discussion:
[N8VEM: 20194] N8-2312 Final Partlist
Neslou
2015-10-06 08:14:54 UTC
Permalink
Hi Everybody,

I have order a long time ago 2 N8-2312 Boards and never take the time to
assemble components.
Now, i will try again and would like to know if someone could share with me
his(or her) partlists please?
I know that it is quite the same with the N8-2511 Boards, but i must admit
that if someone that had already built one will help me a lot.
Thank's in advance.

Regards.

Neslou.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
Wayne Warthen
2015-10-06 23:49:55 UTC
Permalink
Here is the one I used. It is an Excel file. If you need me to convert it
to a more common file format, let me know.

--Wayne
Post by Neslou
Hi Everybody,
I have order a long time ago 2 N8-2312 Boards and never take the time to
assemble components.
Now, i will try again and would like to know if someone could share with
me his(or her) partlists please?
I know that it is quite the same with the N8-2511 Boards, but i must admit
that if someone that had already built one will help me a lot.
Thank's in advance.
Regards.
Neslou.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
Neslou
2015-10-07 09:27:40 UTC
Permalink
Hi Wayne,

Thank you for your prompt reply!
It is perfect in Excel Format.
I hope i could help other people next time with my adventure Regards...
My aim is to start with this board for the learning curve and then improve
my knowledge.
I will document my journey on my blog step by step and in the wiki if
needed.

Regards.

Neslou.
Post by Neslou
Hi Everybody,
I have order a long time ago 2 N8-2312 Boards and never take the time to
assemble components.
Now, i will try again and would like to know if someone could share with
me his(or her) partlists please?
I know that it is quite the same with the N8-2511 Boards, but i must admit
that if someone that had already built one will help me a lot.
Thank's in advance.
Regards.
Neslou.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
Neslou
2015-10-15 08:04:14 UTC
Permalink
Sorry to annoy you again Wayne,

I am near finish to prepare the BOM list to buy, but i have some problem to
find replacement part for some pieces :

L1 INDUCTOR (BEAD) INDUCTOR_V 1 EMI Filter Beads, Chokes & Arrays SINGLE
BEAD CORE EXC-ELSR35S Mouser 667-EXC-ELSR35S P6 PS/2_MOUSE mini_din-M_DIN6 1 Circular
DIN Connectors 6P R/A FULL SHIELD GOLD PLATED GREEN KMDGX-6S-BS3395C Mouser
806-KMDGX-6S-BS3395C P21 COMP_VIDEO RCA_video_jack 1 Phono (RCA) Connectors
PHONO R/A PCB YEL 161-0380 Mouser 161-0380 P23 ASCI_OSC 8dip300 1 Standard
Clock Oscillators DIP-8 5V 2.4576MHz XO52CTFLNA2M4576 Mouser 73-XO52B245 P27
FLOPPY PIN_ARRAY_17X2 1 Headers & Wire Housings 34P STRAIGHT BHR-34-VUA
Mouser 737-BHR-34-VUA P29 PPIDE PIN_ARRAY_20X2 1 Headers & Wire Housings
40P STRAIGHT BHR-40-VUA Mouser 737-BHR-40-VUA P31,P38 PARALLEL, PARALLEL EXP
PIN_ARRAY_13x2 2 Headers & Wire Housings 26P STRAIGHT BHR-26-VUA Mouser
737-BHR-26-VUA P39 SERIAL0 PIN_ARRAY_5x2 1 Headers & Wire Housings 10P
STRAIGHT BHR-10-VUA Mouser 737-BHR-10-VUA U2,U7 8255 40dip600 2 IC,82C55A,CPU
PERIPHERAL DIP-40,5MHZ 82C55A Jameco 52417 U33 TMS9918 40dip600 1 GPIB
Interface/Controller TMS9918ANL Utsource U39 AY-3-8910 40dip600 1 PROGRAMMABLE
SOUND GENERATOR AY-3-8910A Utsource U61 WD37C65BJM PLCC44 1 Floppy Disk
Controller WD37C65BJM Andrew
Have you got other References / Manufacturer to advise to me?

Regards.

Neslou.
Post by Neslou
Hi Wayne,
Thank you for your prompt reply!
It is perfect in Excel Format.
I hope i could help other people next time with my adventure Regards...
My aim is to start with this board for the learning curve and then improve
my knowledge.
I will document my journey on my blog step by step and in the wiki if
needed.
Regards.
Neslou.
Post by Neslou
Hi Everybody,
I have order a long time ago 2 N8-2312 Boards and never take the time to
assemble components.
Now, i will try again and would like to know if someone could share with
me his(or her) partlists please?
I know that it is quite the same with the N8-2511 Boards, but i must
admit that if someone that had already built one will help me a lot.
Thank's in advance.
Regards.
Neslou.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
Gary Kaufman
2015-10-15 13:33:44 UTC
Permalink
I can help with a few items:

I used these:

Mouser #: 520-TCH245
Mfr. #: ECS-2100A-2.4576MHZ
Desc.: Standard Clock OscillatorsDIP-3 5V 2.4576MHz

Mouser #: 968-CP82C55AZ
Mfr. #: CP82C55AZ
Desc.: Interface - I/O ExpandersW/ANNEAL PERIPH PRG- I/O5V8MHZ40PDIPCOM

Mouser #: 623-2743001112LF
Mfr. #: 2743001112
Desc.: EMI Filter Beads, Chips & Arrays43 BEAD ON LEAD Z=68 OHM @ 100MHz

Mouser #: 806-KMDGX-6S-BS2715C
Mfr. #: KMDGX-6S-BS2715C
Desc.: Circular DIN Connectors6P R/A FULL SHIELD GOLD PLATED PURPLE

For the pin strips, I just purchase longer lengths and cut as needed.

Look on Ebay for TMS9918, WD37C65BJM and AY-3-8910, lots of counterfeit and
remarked parts from China but UTSource is generally reliable.

- Gary
Post by Neslou
Sorry to annoy you again Wayne,
I am near finish to prepare the BOM list to buy, but i have some problem
L1 INDUCTOR (BEAD) INDUCTOR_V 1 EMI Filter Beads, Chokes & Arrays SINGLE
BEAD CORE EXC-ELSR35S Mouser 667-EXC-ELSR35S P6 PS/2_MOUSE mini_din-M_DIN6
1 Circular DIN Connectors 6P R/A FULL SHIELD GOLD PLATED GREEN
KMDGX-6S-BS3395C Mouser 806-KMDGX-6S-BS3395C P21 COMP_VIDEO RCA_video_jack
1 Phono (RCA) Connectors PHONO R/A PCB YEL 161-0380 Mouser 161-0380 P23
ASCI_OSC 8dip300 1 Standard Clock Oscillators DIP-8 5V 2.4576MHz
XO52CTFLNA2M4576 Mouser 73-XO52B245 P27 FLOPPY PIN_ARRAY_17X2 1 Headers &
Wire Housings 34P STRAIGHT BHR-34-VUA Mouser 737-BHR-34-VUA P29 PPIDE
PIN_ARRAY_20X2 1 Headers & Wire Housings 40P STRAIGHT BHR-40-VUA Mouser
737-BHR-40-VUA P31,P38 PARALLEL, PARALLEL EXP PIN_ARRAY_13x2 2 Headers &
Wire Housings 26P STRAIGHT BHR-26-VUA Mouser 737-BHR-26-VUA P39 SERIAL0
PIN_ARRAY_5x2 1 Headers & Wire Housings 10P STRAIGHT BHR-10-VUA Mouser
737-BHR-10-VUA U2,U7 8255 40dip600 2 IC,82C55A,CPU PERIPHERAL DIP-40,5MHZ
82C55A Jameco 52417 U33 TMS9918 40dip600 1 GPIB Interface/Controller
TMS9918ANL Utsource U39 AY-3-8910 40dip600 1 PROGRAMMABLE SOUND
GENERATOR AY-3-8910A Utsource U61 WD37C65BJM PLCC44 1 Floppy Disk
Controller WD37C65BJM Andrew
Have you got other References / Manufacturer to advise to me?
Regards.
Neslou.
Post by Neslou
Hi Wayne,
Thank you for your prompt reply!
It is perfect in Excel Format.
I hope i could help other people next time with my adventure Regards...
My aim is to start with this board for the learning curve and then
improve my knowledge.
I will document my journey on my blog step by step and in the wiki if
needed.
Regards.
Neslou.
Post by Neslou
Hi Everybody,
I have order a long time ago 2 N8-2312 Boards and never take the time to
assemble components.
Now, i will try again and would like to know if someone could share with
me his(or her) partlists please?
I know that it is quite the same with the N8-2511 Boards, but i must
admit that if someone that had already built one will help me a lot.
Thank's in advance.
Regards.
Neslou.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
Wayne Warthen
2015-10-15 15:56:33 UTC
Permalink
Thanks Gary.

I think you covered everything except the phono connector. Mouser has
these which look equivalent:

Mouser #: 534-589
Mfr. #: 589
Desc.: RCA Phono Connectors Ylw Snapfit 90deg PC .465x.571x.328
Post by Gary Kaufman
Mouser #: 520-TCH245
Mfr. #: ECS-2100A-2.4576MHZ
Desc.: Standard Clock OscillatorsDIP-3 5V 2.4576MHz
Mouser #: 968-CP82C55AZ
Mfr. #: CP82C55AZ
Desc.: Interface - I/O ExpandersW/ANNEAL PERIPH PRG- I/O5V8MHZ40PDIPCOM
Mouser #: 623-2743001112LF
Mfr. #: 2743001112
Mouser #: 806-KMDGX-6S-BS2715C
Mfr. #: KMDGX-6S-BS2715C
Desc.: Circular DIN Connectors6P R/A FULL SHIELD GOLD PLATED PURPLE
For the pin strips, I just purchase longer lengths and cut as needed.
Look on Ebay for TMS9918, WD37C65BJM and AY-3-8910, lots of counterfeit
and remarked parts from China but UTSource is generally reliable.
- Gary
Post by Neslou
Sorry to annoy you again Wayne,
I am near finish to prepare the BOM list to buy, but i have some problem
L1 INDUCTOR (BEAD) INDUCTOR_V 1 EMI Filter Beads, Chokes & Arrays SINGLE
BEAD CORE EXC-ELSR35S Mouser 667-EXC-ELSR35S P6 PS/2_MOUSE
mini_din-M_DIN6 1 Circular DIN Connectors 6P R/A FULL SHIELD GOLD PLATED
GREEN KMDGX-6S-BS3395C Mouser 806-KMDGX-6S-BS3395C P21 COMP_VIDEO
RCA_video_jack 1 Phono (RCA) Connectors PHONO R/A PCB YEL 161-0380 Mouser
161-0380 P23 ASCI_OSC 8dip300 1 Standard Clock Oscillators DIP-8 5V
2.4576MHz XO52CTFLNA2M4576 Mouser 73-XO52B245 P27 FLOPPY PIN_ARRAY_17X2 1 Headers
& Wire Housings 34P STRAIGHT BHR-34-VUA Mouser 737-BHR-34-VUA P29 PPIDE
PIN_ARRAY_20X2 1 Headers & Wire Housings 40P STRAIGHT BHR-40-VUA Mouser
737-BHR-40-VUA P31,P38 PARALLEL, PARALLEL EXP PIN_ARRAY_13x2 2 Headers &
Wire Housings 26P STRAIGHT BHR-26-VUA Mouser 737-BHR-26-VUA P39 SERIAL0
PIN_ARRAY_5x2 1 Headers & Wire Housings 10P STRAIGHT BHR-10-VUA Mouser
737-BHR-10-VUA U2,U7 8255 40dip600 2 IC,82C55A,CPU PERIPHERAL DIP-40,5MHZ
82C55A Jameco 52417 U33 TMS9918 40dip600 1 GPIB Interface/Controller
TMS9918ANL Utsource U39 AY-3-8910 40dip600 1 PROGRAMMABLE SOUND
GENERATOR AY-3-8910A Utsource U61 WD37C65BJM PLCC44 1 Floppy Disk
Controller WD37C65BJM Andrew
Have you got other References / Manufacturer to advise to me?
Regards.
Neslou.
Post by Neslou
Hi Wayne,
Thank you for your prompt reply!
It is perfect in Excel Format.
I hope i could help other people next time with my adventure Regards...
My aim is to start with this board for the learning curve and then
improve my knowledge.
I will document my journey on my blog step by step and in the wiki if
needed.
Regards.
Neslou.
Post by Neslou
Hi Everybody,
I have order a long time ago 2 N8-2312 Boards and never take the time
to assemble components.
Now, i will try again and would like to know if someone could share
with me his(or her) partlists please?
I know that it is quite the same with the N8-2511 Boards, but i must
admit that if someone that had already built one will help me a lot.
Thank's in advance.
Regards.
Neslou.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
Loading...