[N8VEM: 19276] Eagle Pro Questions

[Kip Koon]

Hi Guys,

I just got Eagle 7.1.0 and I am trying to figure out how to get the
Autorouter lay out the traces. It seems to calculate them, but never
actually draws them. Thanks.



Kip Koon

***@sc.rr.com

http://www.cocopedia.com/wiki/index.php/Kip_Koon

[Alan Hightower]

It will compute as many variant routings as you configure. If you are
satisfied with one of them, you can click evaluate to transfer it to the
board.

-Alan

Post by Kip Koon
Hi Guys,
I just got Eagle 7.1.0 and I am trying to figure out how to get the Autorouter lay out the traces. It seems to calculate them, but never actually draws them. Thanks.
Kip Koon
http://www.cocopedia.com/wiki/index.php/Kip_Koon [1]
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
Visit this group at http://groups.google.com/group/n8vem [2].
For more options, visit https://groups.google.com/d/optout [3].

Links:
------
[1] http://www.cocopedia.com/wiki/index.php/Kip_Koon
[2] http://groups.google.com/group/n8vem
[3] https://groups.google.com/d/optout

[Kip Koon]

Hi Alan,

Thank you very much. I finally figured it out. I was so use to looking in the lower left hand corner of the Eagle Window I did not notice the bar counting off the percentage complete in the lower right hand corner. :P



Kip Koon

***@sc.rr.com

http://www.cocopedia.com/wiki/index.php/Kip_Koon





From: ***@googlegroups.com [mailto:***@googlegroups.com] On Behalf Of Alan Hightower
Sent: Sunday, February 08, 2015 12:14 PM
To: ***@googlegroups.com
Subject: Re: [N8VEM: 19277] Eagle Pro Questions





It will compute as many variant routings as you configure. If you are satisfied with one of them, you can click evaluate to transfer it to the board.



-Alan





On 2015-02-06 09:38, Kip Koon wrote:

Hi Guys,

I just got Eagle 7.1.0 and I am trying to figure out how to get the Autorouter lay out the traces. It seems to calculate them, but never actually draws them. Thanks.



Kip Koon

***@sc.rr.com

http://www.cocopedia.com/wiki/index.php/Kip_Koon
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.