[N8VEM: 16620] Assist09 for N8VEM standalone

[Borut]

I uploaded a version of ASSIST09 monitor for N8VEM standalone to N8VEM site.
It is much easier debugging code with Assist09 than with N8VEM monitor,
but due to space constraints it doesn't support booting any OS.
It should be burned in 2716 and not in 28c16, because during single step it
will
trample on itself.
In this version of sources the breakpoints don't work, or at least i
couldn't get them to work,
but i didn't spend much time on that.
Single stepping kinda works with PTM and jumper installed between pins 1
and 2 of K2.
To assemble you have to use a really old version of Motorola's AS9
assembler,
which is also in the zip file.

Bo/

[Borut]

OOps, that shoud be for N8VEM 6809 board!

Post by Borut
I uploaded a version of ASSIST09 monitor for N8VEM standalone to N8VEM site.
It is much easier debugging code with Assist09 than with N8VEM monitor,
but due to space constraints it doesn't support booting any OS.
It should be burned in 2716 and not in 28c16, because during single step
it will
trample on itself.
In this version of sources the breakpoints don't work, or at least i
couldn't get them to work,
but i didn't spend much time on that.
Single stepping kinda works with PTM and jumper installed between pins 1
and 2 of K2.
To assemble you have to use a really old version of Motorola's AS9
assembler,
which is also in the zip file.
Bo/