John Coffman
2014-06-09 19:46:48 UTC
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#ffffff" text="#000000">
The P10 jumper setting has been changed for the ECB Z180 Mark IV cpu
board.<br>
<br>
The old setting was 0xD0 (off, off, on, off); this was used for all
of the initial testing.<br>
<br>
The setting used by both RomWBW and UNA BIOS is now 0x80 (off, on,
on, on). The change was prompted by using a device code for the
on-board peripherals which overlays the devices codes of the N8
boards. This new setting should avoid all conflicts with all of the
existing ECB N8VEM boards.<br>
<br>
================================================<br>
<br>
Old setting: 0xD0..0xDF (off, off, on, off)<br>
New setting: 0x80..0x8F (off, on, on, on)<br>
<br>
<br>
</body>
</html>
<p></p>
-- <br />
You received this message because you are subscribed to the Google Groups "N8VEM" group.<br />
To unsubscribe from this group and stop receiving emails from it, send an email to <a href="mailto:n8vem+unsubscribe-/***@public.gmane.org">n8vem+unsubscribe-/***@public.gmane.org</a>.<br />
To post to this group, send email to <a href="mailto:n8vem-/***@public.gmane.org">n8vem-/***@public.gmane.org</a>.<br />
Visit this group at <a href="http://groups.google.com/group/n8vem">http://groups.google.com/group/n8vem</a>.<br />
For more options, visit <a href="https://groups.google.com/d/optout">https://groups.google.com/d/optout</a>.<br />
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#ffffff" text="#000000">
The P10 jumper setting has been changed for the ECB Z180 Mark IV cpu
board.<br>
<br>
The old setting was 0xD0 (off, off, on, off); this was used for all
of the initial testing.<br>
<br>
The setting used by both RomWBW and UNA BIOS is now 0x80 (off, on,
on, on). The change was prompted by using a device code for the
on-board peripherals which overlays the devices codes of the N8
boards. This new setting should avoid all conflicts with all of the
existing ECB N8VEM boards.<br>
<br>
================================================<br>
<br>
Old setting: 0xD0..0xDF (off, off, on, off)<br>
New setting: 0x80..0x8F (off, on, on, on)<br>
<br>
<br>
</body>
</html>
<p></p>
-- <br />
You received this message because you are subscribed to the Google Groups "N8VEM" group.<br />
To unsubscribe from this group and stop receiving emails from it, send an email to <a href="mailto:n8vem+unsubscribe-/***@public.gmane.org">n8vem+unsubscribe-/***@public.gmane.org</a>.<br />
To post to this group, send email to <a href="mailto:n8vem-/***@public.gmane.org">n8vem-/***@public.gmane.org</a>.<br />
Visit this group at <a href="http://groups.google.com/group/n8vem">http://groups.google.com/group/n8vem</a>.<br />
For more options, visit <a href="https://groups.google.com/d/optout">https://groups.google.com/d/optout</a>.<br />