Kip Koon
2015-01-03 07:40:14 UTC
Hi Marcelo!
That is an interesting idea! The only FPGA experience I have thus far is the Altera Cyclone II EP2C5T144 FPGA chip in the original Multicomp design, so Iâm not going to be any help with your porting project. I will be following your project though with great interest.
Kip Koon
***@sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon
From: ***@googlegroups.com [mailto:***@googlegroups.com] On Behalf Of Marcelo Dantas
Sent: Saturday, December 27, 2014 1:37 AM
To: ***@googlegroups.com
Subject: [N8VEM: 19156] Trying to run the Multicomp on an Altera DE2-70 FPGA board
Hi everyone,
I got myself one of these boards and have tried to port Multicomp to it. It is very different to the one used originally on the project, so I tried to do some obvious needed adaptations (or pin labels, chip type, etc.).
However, all I get, no matter what I try, is a black screen.
I am wondering if anyone here has succeeded running Multicomp with CP/M on this board, or maybe on an Altera DE2(-35) and could share the code. Porting from the DE2 to the DE-70 is (more or less) easy, so I should be able to adapt the code.
I am sure I am doing something wrong, but I still can't figure out what.
Thanks,
Marcelo.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
That is an interesting idea! The only FPGA experience I have thus far is the Altera Cyclone II EP2C5T144 FPGA chip in the original Multicomp design, so Iâm not going to be any help with your porting project. I will be following your project though with great interest.
Kip Koon
***@sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon
From: ***@googlegroups.com [mailto:***@googlegroups.com] On Behalf Of Marcelo Dantas
Sent: Saturday, December 27, 2014 1:37 AM
To: ***@googlegroups.com
Subject: [N8VEM: 19156] Trying to run the Multicomp on an Altera DE2-70 FPGA board
Hi everyone,
I got myself one of these boards and have tried to port Multicomp to it. It is very different to the one used originally on the project, so I tried to do some obvious needed adaptations (or pin labels, chip type, etc.).
However, all I get, no matter what I try, is a black screen.
I am wondering if anyone here has succeeded running Multicomp with CP/M on this board, or maybe on an Altera DE2(-35) and could share the code. Porting from the DE2 to the DE-70 is (more or less) easy, so I should be able to adapt the code.
I am sure I am doing something wrong, but I still can't figure out what.
Thanks,
Marcelo.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.