Kip Koon
2015-07-10 05:16:22 UTC
Hi Folks,
I want to run Flex 2.11, Basic11 and eForth as well. I saw the 68HC11 Old
System files but no schematic was to be found. What would be a good design
for a 68HC11 SBC so I can get this software to run. The files are just
sitting here begging to be used again. :) Any help is most appreciated.
Thanks a bunch.
Kip Koon
<mailto:***@sc.rr.com> ***@sc.rr.com
<http://www.cocopedia.com/wiki/index.php/Kip_Koon>
http://www.cocopedia.com/wiki/index.php/Kip_Koon
I want to run Flex 2.11, Basic11 and eForth as well. I saw the 68HC11 Old
System files but no schematic was to be found. What would be a good design
for a 68HC11 SBC so I can get this software to run. The files are just
sitting here begging to be used again. :) Any help is most appreciated.
Thanks a bunch.
Kip Koon
<mailto:***@sc.rr.com> ***@sc.rr.com
<http://www.cocopedia.com/wiki/index.php/Kip_Koon>
http://www.cocopedia.com/wiki/index.php/Kip_Koon
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.