Hi Don,
Post by Don CaprioI'm not finding the ROM image for the Zeta SBC on the Wiki.
Where is it hiding?
As far as I know, Zeta ROMs are build as part of the RomWBW release
(take a look in the "Output" directory in the ZIP archive). There are 4
ROMS built, here's their description from the RomList.txt:
ZETA_std.rom for Zeta Z80 SBC:
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- PPIDE support via built-in PPI
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPIDE00-0,
F:=PPIDE0-01, G:=PPIDE0-02, H:=PPIDE0-03
ZETA_ppp.rom for Zeta Z80 SBC w/ ParPortProp:
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- SD Card support via ParPortProp
- VGA console support via ParPortProp
- PS/2 Keyboard support via ParPortProp
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPPSD0-00,
F:=PPPSD0-01, F:=PPPSD0-02, G:=PPPSD0-03
- WARNING: You must use the RomWBW specific firmware
for the Propeller found in the Support directory!
- NOTE: Console defaults to VGA & PS/2 Keyboard. Short JP1 (CONFIG)
to use the serial port as the console.
ZETA_std_z.rom for Zeta Z80 SBC:
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- PPIDE support via built-in PPI
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPIDE0-00,
F:=PPIDE0-01, G:=PPIDE0-02, H:=PPIDE0-03
ZETA_ppp_z.rom for Zeta Z80 SBC w/ ParPortProp:
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- SD Card support via ParPortProp
- VGA console support via ParPortProp
- PS/2 Keyboard support via ParPortProp
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPPSD0-00,
F:=PPPSD0-01, F:=PPPSD0-02, G:=PPPSD0-03
- WARNING: You must use the RomWBW specific firmware
for the Propeller found in the Support directory!
- NOTE: Console defaults to VGA & PS/2 Keyboard. Short JP1 (CONFIG)
to use the serial port as the console.
Hope this helps. Regards,
Nikolay
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.