[N8VEM: 18923] Ztea SBC

Discussion:

Don Caprio

2014-11-06 23:20:38 UTC

I'm not finding the ROM image for the Zeta SBC on the Wiki.
Where is it hiding?
--
Don Caprio
***@gmail.com

--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+***@googlegroups.com.
To post to this group, send email to ***@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.

Nikolay Dimitrov

2014-11-06 23:57:34 UTC

Permalink

Hi Don,

Post by Don Caprio
I'm not finding the ROM image for the Zeta SBC on the Wiki.
Where is it hiding?

As far as I know, Zeta ROMs are build as part of the RomWBW release
(take a look in the "Output" directory in the ZIP archive). There are 4
ROMS built, here's their description from the RomList.txt:

ZETA_std.rom for Zeta Z80 SBC:
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- PPIDE support via built-in PPI
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPIDE00-0,
F:=PPIDE0-01, G:=PPIDE0-02, H:=PPIDE0-03

ZETA_ppp.rom for Zeta Z80 SBC w/ ParPortProp:
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- SD Card support via ParPortProp
- VGA console support via ParPortProp
- PS/2 Keyboard support via ParPortProp
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPPSD0-00,
F:=PPPSD0-01, F:=PPPSD0-02, G:=PPPSD0-03
- WARNING: You must use the RomWBW specific firmware
for the Propeller found in the Support directory!
- NOTE: Console defaults to VGA & PS/2 Keyboard. Short JP1 (CONFIG)
to use the serial port as the console.

ZETA_std_z.rom for Zeta Z80 SBC:
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- PPIDE support via built-in PPI
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPIDE0-00,
F:=PPIDE0-01, G:=PPIDE0-02, H:=PPIDE0-03

ZETA_ppp_z.rom for Zeta Z80 SBC w/ ParPortProp:
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- SD Card support via ParPortProp
- VGA console support via ParPortProp
- PS/2 Keyboard support via ParPortProp
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPPSD0-00,
F:=PPPSD0-01, F:=PPPSD0-02, G:=PPPSD0-03
- WARNING: You must use the RomWBW specific firmware
for the Propeller found in the Support directory!
- NOTE: Console defaults to VGA & PS/2 Keyboard. Short JP1 (CONFIG)
to use the serial port as the console.

Hope this helps. Regards,
Nikolay

Wayne Warthen

2014-11-07 04:00:21 UTC

Permalink

This is correct. The Wiki folder containing the RomWBW distribution is
here: http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=RomWBW

--Wayne

Post by Nikolay Dimitrov
Hi Don,

Post by Don Caprio
I'm not finding the ROM image for the Zeta SBC on the Wiki.
Where is it hiding?

As far as I know, Zeta ROMs are build as part of the RomWBW release
(take a look in the "Output" directory in the ZIP archive). There are 4
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- PPIDE support via built-in PPI
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPIDE00-0,
F:=PPIDE0-01, G:=PPIDE0-02, H:=PPIDE0-03
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- SD Card support via ParPortProp
- VGA console support via ParPortProp
- PS/2 Keyboard support via ParPortProp
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPPSD0-00,
F:=PPPSD0-01, F:=PPPSD0-02, G:=PPPSD0-03
- WARNING: You must use the RomWBW specific firmware
for the Propeller found in the Support directory!
- NOTE: Console defaults to VGA & PS/2 Keyboard. Short JP1 (CONFIG)
to use the serial port as the console.
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- PPIDE support via built-in PPI
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPIDE0-00,
F:=PPIDE0-01, G:=PPIDE0-02, H:=PPIDE0-03
- 512KB ROM, 512KB RAM
- 38.4KB serial console baud rate
- Basic ROM/RAM disk
- Floppy support via built-in FDC
- SD Card support via ParPortProp
- VGA console support via ParPortProp
- PS/2 Keyboard support via ParPortProp
- Drives A:=ROM, B:=RAM, C:=FD0, D:=FD1, E:=PPPSD0-00,
F:=PPPSD0-01, F:=PPPSD0-02, G:=PPPSD0-03
- WARNING: You must use the RomWBW specific firmware
for the Propeller found in the Support directory!
- NOTE: Console defaults to VGA & PS/2 Keyboard. Short JP1 (CONFIG)
to use the serial port as the console.
Hope this helps. Regards,
Nikolay