William R Sowerbutts
2014-04-30 21:03:49 UTC
Hi everyone
Thanks for your feedback on my Z80 FPGA computer project. Your kind words and
enthusiasm have rekindled my interest in the project.
I've put up a web page (largely based on my email to the list), and I've put
together a release which includes;
- FPGA bitstream for Papilio Pro
- Full VHDL source code
- Source code to the ROM monitor
- CP/M 2.2 BIOS (including source code)
- MP/M-II XIOS (including source code)
- RAM disk images to run CP/M 2.2, MP/M-II and UZI
My source code included in this release is licensed under the GNU GPL 3.
You can download it now at http://sowerbutts.com/socz80/
The UZI port is included and runs well. I've not included the source code in
this release although I plan to in a future release -- I'm going to separate
out the platform-dependent code and get it booting on the Mark IV SBC and
then release one distribution for both platforms. In the interim please
contact me off-list if you'd like the source.
Any feedback would be warmly received, and I would really love to hear from
you if you get socz80 working on your FPGA.
Thanks, and happy hacking!
Will
_________________________________________________________________________
William R Sowerbutts will-***@public.gmane.org
"Carpe post meridiem" http://sowerbutts.com
main(){char*s=">#=0> ^#X@#@^7=",c=0,m;for(;c<15;c++)for
(m=-1;m<7;putchar(m++/6&c%3/2?10:s[c]-31&1<<m?42:32));}
Thanks for your feedback on my Z80 FPGA computer project. Your kind words and
enthusiasm have rekindled my interest in the project.
I've put up a web page (largely based on my email to the list), and I've put
together a release which includes;
- FPGA bitstream for Papilio Pro
- Full VHDL source code
- Source code to the ROM monitor
- CP/M 2.2 BIOS (including source code)
- MP/M-II XIOS (including source code)
- RAM disk images to run CP/M 2.2, MP/M-II and UZI
My source code included in this release is licensed under the GNU GPL 3.
You can download it now at http://sowerbutts.com/socz80/
The UZI port is included and runs well. I've not included the source code in
this release although I plan to in a future release -- I'm going to separate
out the platform-dependent code and get it booting on the Mark IV SBC and
then release one distribution for both platforms. In the interim please
contact me off-list if you'd like the source.
Any feedback would be warmly received, and I would really love to hear from
you if you get socz80 working on your FPGA.
Thanks, and happy hacking!
Will
_________________________________________________________________________
William R Sowerbutts will-***@public.gmane.org
"Carpe post meridiem" http://sowerbutts.com
main(){char*s=">#=0> ^#X@#@^7=",c=0,m;for(;c<15;c++)for
(m=-1;m<7;putchar(m++/6&c%3/2?10:s[c]-31&1<<m?42:32));}