[N8VEM: 16261] Zeta 26 pin stackable header

[Jim Strickland]

I was reading the group last night and stumbled across a discussion about stackable headers for the Zeta 26 pin parallel port, in reference to adding another card under the para-prop board. I wondered if this, sourced for the Raspberry Pi's 26 pin header and seemingly compatible with the soldering holes in my Zeta boards, would solve that problem?

http://www.adafruit.com/products/1112

-JRS

[Sergey]

Jim,

It looks like that connector will work with Zeta/ParPortProp. I used a
slightly different one (without long pins), but you can always cut pins if
needed. You can also use a couple of these connectors and stuck another
board on top - ParPortProp only uses 2 of 3 8-bit ports of 82C55. And some
people came up with interesting uses for the remaining port - e.g.
connecting a DAC for speech synthesizing.

Thanks,
Sergey

Post by Jim Strickland
I was reading the group last night and stumbled across a discussion about
stackable headers for the Zeta 26 pin parallel port, in reference to adding
another card under the para-prop board. I wondered if this, sourced for the
Raspberry Pi's 26 pin header and seemingly compatible with the soldering
holes in my Zeta boards, would solve that problem?
http://www.adafruit.com/products/1112
-JRS